Strike Anchor Description

The concrete strike anchor is an impact-expansion type concrete anchor. The body of the strike anchor is made from carbon steel; the drive pin is hardened steel. The strike anchor is plated with yellow dichromate over zinc. The strike anchor is set in the concrete by hammering the pin down through the middle of the anchor.

Commonly Called

Strike anchors, all American anchor, hit anchor, nail anchor, all anchor, EZA, easy set expansion anchor.

Strike Anchor Advantages

• Easy to use
• Anchor size is hole size.
• Insert anchor into hole with nut and washer attached.
• Hammer pin until flush.
• The nut and washer can be preset for the desired embedment.
• The strike anchor is visually inspectable after it is set. When the head of the pin meets the threads, the anchor is set.
• Excellent holding values.
• Nuts and washers included
• No templates required, the actual diameter of the anchor is the same as it nominal diameter.

Strike Anchor Applications

Medium to heavy into concrete. Can be used for anchoring outlet boxes, stadium seats, wood or steel plates, conveyor systems, handrails and many more.

Strike Anchor Approvals

Meets I.C.B.O. standards report #4194, Meets City of Los Angeles Approval #25109, Meets or exceeds G.S.A. Standards G.S.A. FF-S-325, Group V, Type 2 Class 2, Meets load factors in compliance with A.N.S.I. A58-1, Meets plating standard in compliance with A.S.T.M. E488488.

---

Back to top | Purchase Strike Anchors | Other Concrete Fasteners and Anchors